News
Home > News > How Deep Can a Mini Excavator Dig? Dig Depth Chart by Machine Size (2026)

How Deep Can a Mini Excavator Dig? Dig Depth Chart by Machine Size (2026)

Published Date:2026-11-16 Views:7

A mini excavator digs between 1,091 mm and 2,590 mm (3.6–8.5 ft) below ground, and the number is set almost entirely by the machine’s operating weight class. In the JYH range — from the 660 kg micro to the 2,540 kg JYH27 — the shallowest machine reaches 1,091 mm, the 1-ton class sits at 1,717–1,730 mm, the 1.5–1.8 ton class reaches 1,991–2,340 mm, and the 2.2–2.5 ton class reaches 2,410–2,590 mm.

Those figures are maximum digging depth with the boom, arm and bucket fully extended straight down. In practice, a contractor who needs a 1.5 m water line usually buys a machine rated at 1.7 m or more, because soil, bucket geometry and spoil placement all eat into the catalogue number. This page lists the measured dig depth for every model we build, plus the depth that actually holds up on site.

Mini Excavator Dig Depth Chart (JYH 2026 Range)

All ten models below are current production machines. Dig depth is measured from ground level to the bucket teeth with the arm fully extended, which is the same basis used in the specification tables on each product page.

Model Operating weight Max dig depth Max dig depth (ft) Max dig height Max dig radius Breakout force Engine power
JYH06 660 kg 1,091 mm 3.6 ft 2,114 mm 2,254 mm 3.5 kN 6.3–6.8 kW
JYH10D 680 kg 1,725 mm 5.7 ft 2,449 mm 2,878 mm 7.2 kN 7.6–9.2 kW
JYH10 700 kg 1,730 mm 5.7 ft 2,490 mm 2,750 mm — 7.6 kW
JYH10A 730 kg 1,722 mm 5.6 ft 2,452 mm 2,830 mm 7.2 kN 7.6–9.2 kW
JYH12 900 kg 1,717 mm 5.6 ft 2,717 mm 3,057 mm 7.2 kN 7.6 kW
JYH13 (TC13) 925 kg 1,729 mm 5.7 ft 2,708 mm 3,063 mm 7.2 kN 8.6 kW
JYH15 1,275 kg 1,991 mm 6.5 ft 2,928 mm 3,396 mm 9.0 kN 18.1 kW
JYH17-A 1,525 kg 2,340 mm 7.7 ft 3,245 mm 3,680 mm 13.5 kN 18.1 kW
JYH25 2,200 kg 2,410 mm 7.9 ft 4,190 mm 4,520 mm 20 kN 15.2 kW
JYH27 2,540 kg 2,590 mm 8.5 ft 4,370 mm 4,640 mm 20 kN 15.2 kW

How Deep Can a 1 Ton Mini Excavator Dig?

A 1-ton class mini excavator digs to about 1.72 m (5.6–5.7 ft). Our five machines in the 680–925 kg band — JYH10D, JYH10, JYH10A, JYH12 and JYH13 — land within 13 mm of each other, between 1,717 mm and 1,730 mm, even though their operating weights span 245 kg. Buyers often expect a machine that is 36% heavier to dig noticeably deeper, and in this class it does not.

Where these five models do differ is width and reach: 730 mm for the JYH10, 930–1105 mm for the adjustable-track JYH12, and a maximum digging radius from 2,750 mm to 3,063 mm. For a 1.2 m deep residential utility trench, all five leave 0.5 m of headroom, which is the margin we recommend once spoil and bucket position are taken into account.

How Deep Can a 1.5 to 1.8 Ton Mini Excavator Dig?

The 1.5–1.8 ton class is where depth starts climbing properly: the 1,275 kg JYH15 reaches 1,991 mm and the 1,525 kg JYH17-A reaches 2,340 mm. Both run an 18.1 kW engine, so the extra 349 mm of depth comes from boom and arm geometry rather than horsepower, and breakout force rises from 9.0 kN to 13.5 kN — a 50% jump that matters in compacted clay and hard-packed gravel.

How Deep Can a 2.2 to 2.5 Ton Mini Excavator Dig?

The largest machines we build are the 2,200 kg JYH25 at 2,410 mm and the 2,540 kg JYH27 at 2,590 mm. Both use a Yanmar 3TNV80 at 15.2 kW with 20 kN of breakout force, a 4,520–4,640 mm digging radius and 4,190–4,370 mm digging height. That is enough for a full-depth foundation footing, a domestic septic tank, or a swimming pool shell without staging the excavation.

Why Does a Micro Excavator Stop at 1.1 m?

The 660 kg JYH06 digs to 1,091 mm, and that is a geometry limit, not a power limit. Its 690 mm total width and 2,254 mm digging radius come from a deliberately short boom and arm so the machine fits through a 1 m garden gate and turns inside a 2.5 m path. Extending the arm to reach 1.7 m would lengthen the machine past the point where it can work between fence lines, so if your trench is deeper than 1.1 m, the answer is a 1-ton machine rather than a longer arm on a micro.

Dig Depth vs Digging Radius: Which Number Decides Your Trench?

Depth tells you how far down the bucket goes when the machine sits directly above the trench. Radius tells you how far sideways it reaches without repositioning. For trenching along a fence or a wall, radius is usually the constraint that decides whether you can work in one pass, because the machine cannot sit on top of the line it is digging. The table below matches common jobs to the depth they actually require and the model that covers it with margin.

Job Depth actually needed JYH model Why it fits
Garden drainage, planting holes 0.4–0.8 m JYH06 690 mm width passes a 1 m gate; 1,091 mm depth
Residential cable and pipe trench 0.8–1.2 m JYH10 / JYH10D 1,725–1,730 mm depth leaves 0.5 m margin
Water line below frost line 1.2–1.6 m JYH13 / JYH15 1,729 mm and 1,991 mm; 7.2–9.0 kN breakout
Septic tank and soakaway 1.5–2.0 m JYH17-A 2,340 mm depth, 13.5 kN breakout in clay
Footing, pool shell, deep utility 2.0–2.5 m JYH25 / JYH27 2,410–2,590 mm depth, 20 kN breakout

Four Things That Reduce Real Dig Depth on Site

  • Bucket type. A wide grading bucket spreads breakout force across more teeth and cuts shallower per pass than a narrow trenching bucket on the same machine. The rated depth assumes the standard bucket.
  • Spoil placement. Soil piled beside the trench falls back in. On a 1.7 m rated machine, loose sand and gravel commonly reduce usable depth by 100–150 mm unless the spoil is cast clear of the edge.
  • Ground water. Below the water table the trench walls collapse, so the practical limit becomes how fast you can dewater, not how deep the arm reaches.
  • Machine position. Working on a slope or on soft ground tilts the machine and shortens effective vertical reach. Level, firm footing recovers most of the catalogue figure.

How JYH Checks Dig Depth Before Shipping

We build mini excavators in Jining, Shandong, and every unit goes through a geometry check before it is packed. The machine is set on level concrete, the arm is extended fully downward with the standard bucket fitted, and the vertical distance from the bucket teeth to the ground is measured and logged against the specification sheet. For the JYH17-A that target is 2,340 mm and for the JYH27 it is 2,590 mm; a machine that measures short is adjusted at the boom pivot before shipment rather than corrected by the dealer.

If you send us your trench depth, trench width, soil type and access width, we will tell you which of the ten models covers the job with margin — and if the honest answer is that a 1-ton machine is enough, we will say so rather than push you into a 2.5 ton unit.

Frequently Asked Questions

How deep can a mini excavator dig in feet?

Between 3.6 ft and 8.5 ft, depending on size class. A 660 kg micro reaches 3.6 ft, a 1-ton machine reaches 5.6–5.7 ft, a 1.5–1.8 ton machine reaches 6.5–7.7 ft, and a 2.2–2.5 ton machine reaches 7.9–8.5 ft.

Can a mini excavator dig 2 metres deep?

Yes, but only from the 1.5 ton class upward. The JYH15 reaches 1,991 mm, the JYH17-A reaches 2,340 mm and the JYH25 reaches 2,410 mm. A 1-ton machine rated at 1,730 mm cannot reach 2 m even in ideal soil.

How deep can a 1 ton mini excavator dig?

About 1,720 mm (5.6–5.7 ft). Our JYH10, JYH10A, JYH10D, JYH12 and JYH13 all fall between 1,717 mm and 1,730 mm, a spread of 13 mm across five models.

Does the rated dig depth include the bucket?

Yes. Dig depth is measured from ground level to the bucket teeth with the standard bucket fitted and the arm fully extended downward. Fitting a longer arm changes the figure, and fitting a tilting or wide grading bucket usually reduces it.

Can a longer arm make a mini excavator dig deeper?

A longer arm adds depth and radius, but it also reduces breakout force at the teeth because the same hydraulic cylinder works through a longer lever. On our machines breakout force ranges from 3.5 kN on the JYH06 to 20 kN on the JYH25 and JYH27, so in hard ground the heavier machine wins over a modified lighter one.

What is the difference between dig depth and dig height?

Dig depth is how far below ground the bucket teeth reach — 1,091 mm on the JYH06 up to 2,590 mm on the JYH27. Dig height is how far the bucket lifts above ground — 2,114 mm to 4,370 mm on the same range. Dig height decides whether you can load a truck or dump over a wall.

How deep can a mini excavator dig in clay?

Clay does not usually limit depth on a machine with enough breakout force; it limits cycle time. The JYH17-A at 13.5 kN and the JYH25 and JYH27 at 20 kN are the models we recommend for compacted clay, because a 3.5–7.2 kN micro will stall before it reaches its rated depth in dry clay.

How wide a trench does a mini excavator dig?

Trench width is set by the bucket you fit, not by the machine’s dig depth, so the same excavator can cut a narrow service trench or a wide footing with a bucket change. Tell us the trench width you need and we will match the bucket to the machine before shipment.

This article is original and edited by our website. Reproduction requires the author’s consent, and please cite the source together with the link to this page.

Quick InquiryGet a Quote
表单
Inquiry Email WhatsApp Top
Home Inquiry WhatsApp Top
No:89185